Page 1 of 2
temp gauge problem

Posted:
Wed Dec 09, 2009 8:47 pm
by lardy101
please can someone help? my temp gauge has stopped working and am a bit worried driving any sort of distance how can i tell if the gauge is kaput or if i have the wrong sender (just remember something about different colours) cheers in advance
Re: temp gauge problem

Posted:
Thu Dec 10, 2009 7:44 pm
by 2litreScapri
Depends on what model you have. As for gauges, I have a temp gauge available for you
Kris
Re: temp gauge problem

Posted:
Thu Dec 10, 2009 8:22 pm
by markw
Turn the ignition on remove wire from temp switch and earth it out if temp gauge works you know it's the switch
Re: temp gauge problem

Posted:
Fri Dec 11, 2009 2:20 pm
by ianr
AARRGGGHHHHH it's come back to haunt me. Temp senders, temp housing units and now my twitch has come back just like Inspector Clouseaus boss Commussioner Charles Dreyfus. Just scrap the engine - buy a bike.... In the meantime like the main man Mark says just earth the sender unit and check the temp gauge - you'll soon see if it's working. Right where's my psychiatrist's telephone number now....twitch twitch
Re: temp gauge problem

Posted:
Fri Dec 11, 2009 7:26 pm
by lardy101
so if the needle does not move at all its knackard then
Re: temp gauge problem

Posted:
Fri Dec 11, 2009 8:17 pm
by markw
If needle does not move then it could be gauge not working or even a wiring fault but its most probably the switch at fault. Gauges rarely give a problem.
Re: temp gauge problem

Posted:
Fri Dec 11, 2009 9:06 pm
by lardy101
mark what colour sender should be in my engine its a 2 litre pinto its just ive heard there are different colours is this the case?
Re: temp gauge problem

Posted:
Fri Dec 11, 2009 9:11 pm
by Mk3 Mags
lardy101 wrote:mark what colour sender should be in my engine its a 2 litre pinto its just ive heard there are different colours is this the case?
Lardy, if it's any help mine's a 2-litre Pinto and it's got the white top sender.
Re: temp gauge problem

Posted:
Fri Dec 11, 2009 10:37 pm
by lardy101
the one on my engine is black mmmm maybe this might be a problem ....over to the expert........MARK!!!!!!!!!!
Re: temp gauge problem

Posted:
Sat Dec 12, 2009 4:13 pm
by Mk3 Mags
Trust me Lardy. I bought mine from the local Ford dealership in November 2002 and it's worked fine since then.
I think black is for the Cologne V6 or Cosworth YB.
Re: temp gauge problem

Posted:
Sat Dec 12, 2009 7:19 pm
by lardy101
ill have to get a white one this week and try that
Re: temp gauge problem

Posted:
Mon Dec 14, 2009 10:36 am
by ianr
DO NOT OVERTIGHTEN THE TEMP SENDER - DO NOT OVERTIGHTEN THE TEMP SENDER.... hope it goes well mate.
Re: temp gauge problem

Posted:
Mon Dec 14, 2009 8:14 pm
by lardy101
damn it my heavy handedness ill probably screw it through the block and out thed other side but at this rate ill probably do it up like a dainty fairy and have water pissing all over the gaff instead

Re: temp gauge problem

Posted:
Tue Dec 15, 2009 12:43 am
by Gazzamobile
Dainty Fairy is good Lardy
Soft Brass Senders threads are not very forgiving

Re: temp gauge problem

Posted:
Fri Mar 05, 2010 9:12 pm
by lardy101
put a new white top sender in and it still didnt work

but then I was out on weds doing something rather special in the capri (nothing naughty)when the temp gauge started working RESULT!!!!
