temp gauge problem

lardy101 · **Posted:** Wed Dec 09, 2009 8:47 pm

please can someone help? my temp gauge has stopped working and am a bit worried driving any sort of distance how can i tell if the gauge is kaput or if i have the wrong sender (just remember something about different colours) cheers in advance

2litreScapri-SCC · **Posted:** Thu Dec 10, 2009 7:44 pm

Depends on what model you have. As for gauges, I have a temp gauge available for you

Kris

markw · **Joined:** Wed Nov 07, 2007 12:16 am **Posts:** 9

Turn the ignition on remove wire from temp switch and earth it out if temp gauge works you know it's the switch

ianr · **Posted:** Fri Dec 11, 2009 2:20 pm

AARRGGGHHHHH it's come back to haunt me. Temp senders, temp housing units and now my twitch has come back just like Inspector Clouseaus boss Commussioner Charles Dreyfus. Just scrap the engine - buy a bike.... In the meantime like the main man Mark says just earth the sender unit and check the temp gauge - you'll soon see if it's working. Right where's my psychiatrist's telephone number now....twitch twitch

lardy101 · **Posted:** Fri Dec 11, 2009 7:26 pm

so if the needle does not move at all its knackard then

markw · **Joined:** Wed Nov 07, 2007 12:16 am **Posts:** 9

If needle does not move then it could be gauge not working or even a wiring fault but its most probably the switch at fault. Gauges rarely give a problem.

lardy101 · **Posted:** Fri Dec 11, 2009 9:06 pm

mark what colour sender should be in my engine its a 2 litre pinto its just ive heard there are different colours is this the case?

Mk3 Mags · **Posted:** Fri Dec 11, 2009 9:11 pm

lardy101 wrote:

mark what colour sender should be in my engine its a 2 litre pinto its just ive heard there are different colours is this the case?

Lardy, if it's any help mine's a 2-litre Pinto and it's got the white top sender.

lardy101 · **Posted:** Fri Dec 11, 2009 10:37 pm

the one on my engine is black mmmm maybe this might be a problem ....over to the expert........MARK!!!!!!!!!!

Mk3 Mags · **Posted:** Sat Dec 12, 2009 4:13 pm

Trust me Lardy. I bought mine from the local Ford dealership in November 2002 and it's worked fine since then.

I think black is for the Cologne V6 or Cosworth YB.

lardy101 · **Posted:** Sat Dec 12, 2009 7:19 pm

ill have to get a white one this week and try that

ianr · **Posted:** Mon Dec 14, 2009 10:36 am

DO NOT OVERTIGHTEN THE TEMP SENDER - DO NOT OVERTIGHTEN THE TEMP SENDER.... hope it goes well mate.

lardy101 · **Posted:** Mon Dec 14, 2009 8:14 pm

damn it my heavy handedness ill probably screw it through the block and out thed other side but at this rate ill probably do it up like a dainty fairy and have water pissing all over the gaff instead :oops:

Gazzamobile · **Posted:** Tue Dec 15, 2009 12:43 am

Dainty Fairy is good Lardy

Soft Brass Senders threads are not very forgiving :wink:

lardy101 · **Posted:** Fri Mar 05, 2010 9:12 pm

put a new white top sender in and it still didnt work

but then I was out on weds doing something rather special in the capri (nothing naughty)when the temp gauge started working RESULT!!!!

temp gauge problem

Who is online